Ball Valve
Features:
  • “Antiblock” system that avoids ball blockage.
  • 100% factory tested.
  • Available in PVC-U, PVC-C, PP-H
  • Threaded seal carrier, it allows the disassembling of the valve while maintaining system pressure.
  • Union ends for easy installation and removal.
  • Handle built-in tool for easy adjustment of the threaded seal-carrier (and ball torque).
  • Integrated fastening system.
  • Features a built-in locking device.
  • Good mechanical strength.
  • Resistance to many inorganic chemicals.
  • Excellent flow characteristics.
  • Sizes from D16 to D110 (⅜” – 4”).
  • Available standards: Metric, ASTM,British Standard, JIS.
  • Threaded versions: BSP and NPT.
  • O-Rings available in food grade EPDM or Viton®.
  • Ball seat in PTFE.
  • Electric and pneumatic actuators available.
Technical Details:
  • Working pressure at 20°C (73°F) water temperature:
  • D16 – D63 (⅜” – 2”): PN 16 (240 psi)
  • D75 – D110 (2½” – 4”): PN 10 (150 psi)
  • PVDF: PN 16 (240 psi)
  • PP-H & ABS : PN 10 (150 psi)
FIG. Parts Matrials
01 Shaft PVC-U
02 Ball PVC-U
03 Union nut PVC -U
04 Handle PP – TPE
05 END connector PVC-U
06 Ball Seat HDPE / PTEF
07 Shaft a-ring EDPM / Food Grade EDPM
08 Dampener seal EDPM / Food Grade EDPM
09 End Connector O-ring EDPM / Food Grade EDPM
10 Body PVC-U
11 Seal-carrier PVC-U
PVC-U D DN PN L H E
36500 16 15 16 13 87 50
36501 20 15 16 16 87 50
36502 25 20 16 19 101 61
36503 32 25 16 22 122 70
36504 40 32 16 26 135 81
36505 50 40 16 31 149 96
36506 62 50 16 38 174 118
36507 75 65 10 44 216 146
36508 90 80 10 51 256 176
36509 110 100 10 63 359 228

pressure Loss Diagram

pressure / Temperature Graph

Butterfly Valve
Standard Series
Features:
  • Ideally suited for flow control using minimal piping space.
  • 100% factory tested.
  • Minimal pressure drop.
  • Low maintenance.
  • Resistance to many inorganic chemicals.
  • Excellent flow characteristics.
  • Good mechanical strength.
  • One piece PVC-U body.
  • New disc design in PVC-U
  • Sizes from 63 mm to 315 mm (2”- 12”).
  • Available standards: ISO/DIN, ANSI/ASTM, British Standard, JIS.
  • Rubber seal available in EPDM or Viton®.
  • Non-wetted zinc plated steel shaft.
  • Ideally suited for irrigation installations or swimming pools.
FIG. Parts Matrials
01 Body PP-GF
02 Valve disc PVC-U / PVC-C / PP
03 Rubber seal FOOD grade EPDM/ vitron®

04 Shaft Zink plated steel
05 O-Ring seal EPDM / viton
06 Top bearing PP – GF
07 Throttle POM
08 Lever-lock POM
09 Handle PP – GF
D CODE Ref. DN PN
63 – 75 32614 05 83 075 65 10
90 32615 05 83 090 80 10
110 32616 05 83 110 100 10
125 – 140 32617 05 83 140 125 10
160 32618 05 83 160 150 10
200 – 225 32619 05 83 200 200 10
250 – 280 46647 05 83 250 250 10
315 46648 05 83 315 300 10

pressure Loss Diagram

pressure / Temperature Graph

Industrial Series
Features:
  • Ideally suited for flow control using minimal piping space.
  • 100% factory tested.
  • Minimal pressure drop.
  • Low maintenance.
  • Resistance to many inorganic chemicals.
  • Excellent flow characteristics.
  • Good mechanical strength.
  • One piece PP – GF body.
  • Sizes from 63 mm to 315 mm (2” – 12”).
  • Available standards: ISO/DIN, ANSI/ASTM,British Standard, JIS.
  • Rubber seal available in food grade EPDM or Viton®.
  • Built in lockout feature to prevent undesired operations.
  • Electric and pneumatic actuators available,and with gear box.
  • Disc available in different materials.
  • Non-wetted shaft in stainless steel.
  • Ideally suited for industrial, water treatment or water distribution applications.
FIG. Parts Matrials
01 Body PP-GF
02 Valve disc PVC-U / PVC-C / PP
03 Rubber seal FOOD grade EPDM/ vitron®
04 Shaft Zink plated steel
05 O-Ring seal EPDM / viton
06 Top bearing PP – GF
07 Throttle POM
08 Lever-lock POM
09 Handle PP – GF
CODE D Ref. DN PN
32620 63 – 75 05 84 075 65 10
32621 90 05 84 090 80 10
32622 110 05 84 110 100 10
32623 125 – 140 05 84 140 125 10
32624 160 05 84 160 150 10
32625 200 – 225 05 84 200 200 10

pressure Loss Diagram

pressure / Temperature Graph

Uniblock Valve
Features:
  • “Antiblock” system that avoids ball blockage.
  • 100% factory tested.
  • Fast replacement of O-Rings and ball seat without additional tools.
  • Low maintenance.
  • Excellent flow characteristics.
  • Easy to install.
  • Light weight.
  • Ideally suited for irrigation and swimming pools.
  • Sizes from D20 to D110 (½” – 4”).
  • Available standards: Metric, ASTM, British Standard.
  • Threaded versions: BSP and NPT.
  • O-Rings in EPDM.
  • Ball seat in HDPE.
FIG. Parts Matrials
01 Shaft PVC – U
02 Ball PVC – U
03 Union nut PVC – U
04 Handle PP
05 End connector PVC – U
06 Ball seat HDPE
07 Shaft O-ring EPDM
08 Body O-ring EPDM
09 Dampanner seal EPDM
10 End connector O-ring EPDM
11 Body PVC – U
12 Seal-carrier PVC – U
CODE D DN PN L H E
22773 20 15 10 16 81 52
22774 25 20 10 19 99 60
22775 32 25 10 22 111 69
22776 40 32 10 26 130 84
11375 50 40 10 31 135 94
15826 63 50 10 38 169 116
22777 75 65 10 44 220 128
22778 90 80 10 51 256 178
36728 110 100 10 63 331 228

pressure Loss Diagram

pressure / Temperature Graph

Check Valve
Spring Check Valve
Features:
  • Requires little space in piping systems.
  • Easy installation: wafer body slips between standard flanges. No gaskets required.
  • Vertical and horizontal operation.
  • Available with EPDM or Viton® O-Rings.
  • Excellent flow characteristics.
  • Sizes from D63 mm to D315 mm (2”- 12”).
  • Available Standards: ISO/DIN, also ANSI/ASTM from D110 (4”).
  • Do not install the valve at a distance lower than 5 x D of the pump out.
  • Install with pipe and flange DIN PN 10.
  • Minimum return pressure: 0,2 bar (3 psi).
FIG. Parts Matrials
01 Body PVC – U
02 Flap PVC – U
03 Cap PP
04 Body O-ring EPDM / Vitron®
05 Flap O-ring EPDM / Vitron®
CODE D DN PN A B C
37055 63 50 10 109 20 32
08984 75 65 10 129 20 40
08985 90 80 10 144 20 50
08986 110 100 10 164 22 70
09040 125 110 10 170 25 83
08997 140 125 10 195 23 92
08988 160 150 6 220 25 112
09041 200 175 6 247 28 139
08989 225 200 6 275 35

150
37056 250 250 6 328 40 162
41865 280 250 6 330 40 189
37057 315 300 6 380 45 226

pressure Loss Diagram

pressure / Temperature Graph

Spring Check Valve
Features:
  • 100% factory tested.
  • Easy installation and maintenance.
  • May be used either vertically and horizontally.
  • Available in PVC-U and Corzan® PVC-C.
  • Resistance to many inorganic chemicals.
  • Excellent flow characteristics.
  • Sizes from D20 to D110 (½” – 4”).
  • Available standards: Metric, ASTM, British Standard.
  • Threaded versions: BSP and NPT.
  • O-Rings available in EPDM or Viton®.
  • Minimum return pressure: 0,2 bar (3 psi).
FIG. Parts Matrials
01 Body PVC – U / PVC – C
02 Cone PVC – U / PVC – C
03 Spring Inox.Steel AISI 302
04 Union nut PVC – U / PVC – C
05 End Connector PVC – U / PVC – C
06 Cone O-ring EPDM / Vitron®
07 End Connector O-ring EPDM / Vitron®
08 Seal-carrier PVC – U / PVC – C
CODE D DN PN L H E
09010 16 15 16 14 84 52
09011 20 15 16 16 85 52
09012 25 20 16 19 108 62
09013 32 25 16 22 119 70
09014 40 32 16 22 119 70
09015 50 40 16 31 162 94
09016 63 50 16 38 192 117
09017 75 65 10 44 232 148
09018 90 80 10 51 269 179
09019 110 80 10 61 279 179
37076 110 100 10 61 279 179

pressure Loss Diagram

pressure / Temperature Graph

Ball Check Valve
Features:
  • 100% factory tested.
  • Easy installation and maintenance.
  • May be used either vertically and horizontally.
  • Available in PVC-U and Corzan® PVC-C.
  • Resistance to many inorganic chemicals.
  • Excellent flow characteristics.
  • Sizes from D20 to D110 (½” – 4”).
  • Available standards: Metric, ASTM, British Standard.
  • Threaded versions: BSP and NPT.
  • O-Rings available in EPDM or Viton®.
  • Minimum return pressure: 0,2 bar (3 psi).
FIG. Parts Matrials
01 Body PVC – U / PVC – C
02 Cone PVC – U / PVC – C
03 Spring PVC – U / PVC – C
04 Union nut PVC – U / PVC – C
05 End Connector PVC – U / PVC – C
06 Cone O-ring EPDM / Vitron®
07 End Connector O-ring EPDM / Vitron®
08 Seal-carrier PVC – U / PVC – C
CODE D DN PN L H E
22078 20 15 16 16 84 52
22079 25 20 16 16 108 62
22080 32 25 16 22 119 70
22174 40 32 16 26 142 84
25697 50 40 16 31 162 94
25698 63 50 16 38 192 117
22175 75 65 10 44 232 148
22176 90 80 10 51 269 179
22177 110 80 10 51 269 179

pressure Loss Diagram

pressure / Temperature Graph

Foot Valve
Ball Foot Valve
Features:
  • 100% factory tested.
  • Easy installation and maintenance.
  • May be used either vertically and horizontally.
  • Available in PVC-U and Corzan® PVC-C.
  • Resistance to many inorganic chemicals.
  • Excellent flow characteristics.
  • Sizes from D20 to D110 (½” – 4”).
  • Available standards: Metric, ASTM, British Standard.
  • Threaded versions: BSP and NPT.
  • O-Rings available in EPDM or Viton®.
  • Minimum return pressure: 0,2 bar (3 psi).
FIG. Parts Matrials
01 Body PVC – U
02 Ball PVC – U
04 Union nut PVC – U
05 End Connector PVC – U
06 Closing ring PVC – U
07 Body O-ring EPDM / Vitron®
08 End Connector O-ring EPDM / Vitron®
09 Seal-carrier PVC – U
10 Foot valve screen PP
CODE D DN PN L H E
27537 20 15 16 16 107 52
27538 25 20 16 16 130 62
27539 32 25 16 22 154 70
27540 40 32 16 26 176 84
25705 50 40 16 31 202 94
25706 63 50 16 38 239 117
27543 75 65 10 44 306 148
27544 90 80 10 51 362 179
27545 110 80 10 61 367 179

pressure Loss Diagram

pressure / Temperature Graph

Spring Foot Valve
Features:
  • 100% factory tested.
  • Easy installation and maintenance.
  • May be used either vertically and horizontally.
  • Available in PVC-U and Corzan® PVC-C.
  • Resistance to many inorganic chemicals.
  • Excellent flow characteristics.
  • Sizes from D20 to D110 (½” – 4”).
  • Available standards: Metric, ASTM, British Standard.
  • Threaded versions: BSP and NPT.
  • O-Rings available in EPDM or Viton®.
  • Minimum return pressure: 0,2 bar (3 psi).
FIG.PartsMatrials
01BodyPVC – U / PVC – C
02CallPVC – U / PVC – C
03SpringInox Steel AISI 302
04Union NutPVC – U / PVC – C
05End connectorPVC – U / PVC – C
06Core O-ringEPDM / Vitron®
07End Connector O-ringEPDM / Vitron®
08Seal-carrierPVC – U / PVC – C
09Foot valve screenPP
CODE D DN PN L H E
08990 16 15 16 14 107 52
08991 20 15 16 16 107 52
08992 25 20 16 19 130 62
08993 32 25 16 22 154 70
08994 40 32 16 26 176 84
08995 50 40 16 31 202 94
08996 63 50 16 35 239 117
08997 75 65 10 44 306 148
08998 90 80 10 51 362 179
08999 110 80 10 61 367 179

pressure Loss Diagram

pressure / Temperature Graph

Scroll to Top